Falamos Português
Hablamos Español
4ch Simultaneous Li-ion
V-Mount Battery Charger w/LCD
by Idx
Ref # VL-4SI
For full specifications of this model of products please visit the IDX site clicking HERE
PRODUCT DETAILS
The VL-4Si is a fully simultaneous, high speed 4-channel charger. To monitor the charge status of each individual battery, an LCD display and control panel is located on the front of the unit.
Together with IDX’s Battery Management System software, the VL-4Si – via PC interface – provides detailed battery data to help manage and extend the life of a customer’s battery inventory. This is ideal for network operations and rental facilities.
KEY FEATURES
| Input Voltage: | AC 100-240V 50/60Hz |
| Power Consumption: | 310VA max |
| Quick Charge Current: | Li-ion: 2.3A (4 channels), 3A (1-3 channels) Ni-CD/Ni-MH: 1.9A (1-4 channels) |
| Quick Charge System: | Li-ion: Constant current/Constant voltage Ni-CD/Ni-MH: Constant current |
| Pre-Charge Current: | 360mA approx |
| Operating Temperature: | 14°F ~ 104°F |
| Dimensions: | 6.14(W) x 6.02(H) x 11.34(D) inches |
| Weight: | 7.05 lbs approx. |
| Included Accessories: | Battery Management Software, (1) USB cable |
4ch Dual Simultaneous/Sequential Li-ion
V-Mount Battery Charger
by Idx
Ref # VL-4X
For full specifications of this model of products please visit the IDX site clicking HERE
PRODUCT DETAILS
The VL-4X is a slim, lightweight, affordable 4-channel charger. Dual Simultaneous/Sequential feature charges up to 4 batteries total with any 2 simultaneously. The included AC adapter doubles as a 90W DC power supply
KEY FEATURES
| AC Adapter Input Voltage: | AC 100-240V 50/60Hz |
| AC Adapter: | YHY15006000 |
| Power Consumption: | 220VA max |
| Charge Current: | 1.9A/ max 2.7A |
| Charging Method: | Constant current/Constant voltage |
| DC Output: | 90W (via included AC adapter) |
| Operating Temperature: | 32°F ~ 104°F |
| Dimensions: | 3.56(W) x 6.96(H) x 9.84(D) inches |
| Weight (Charger): | 2.42 lbs approx. |
| Weight (AC Adapter): | 0.99 lbs approx. |
1ch D-Tap Advanced Charger
by Idx
Ref # VL-DT1
For full specifications of this model of products please visit the IDX site clicking HERE
PRODUCT DETAILS
The VL-DT1 is a single channel, low cost, portable charger designed to charge IDX batteries equipped with a D-Tap Advanced port. The D-Tap Advanced’s 3-pin design monitors the cell status to ensure correct, controlled charging which prolongs battery life.
Compatible batteries: DUO-C series (DUO-C95, DUO-C98, DUO-C98RED, DUO-C150, DUO-C190, DUO-C198), SB-U series (SB-U50, SB-U98), IPL series (IPL-98, IPL-150), Imicro series (Imicro-98, Imicro-150), DUO-CP series (DUO-C98P, DUO-C150P, DUO-C198P), ZEN-C series (ZEN-C98G, ZEN-C150G).
KEY FEATURES
| Input Voltage: | AC 100-240V 50/60Hz |
| Charge Current: | 2A |
| Operating Temperature: | 32°F ~ 104°F |
| Dimensions: | 4.3(W) x 1.3(H) x 2.4(D) inches |
| Weight: | 0.5 lbs approx. |
145Wh High-Load Li-Ion
3-Stud Mount Battery w 2x D-Tap & USB-C
by Idx
Ref # ZEN-C150G
For full specifications of this model of products please visit the IDX site clicking HERE
PRODUCT DETAILS
The ZEN-C150G Three Stud Mount battery line, the ZENITH Series. The ZEN-C150G provides a robust 145Wh capacity with the ability to handle max. draw at 15.2A/168W loads, as well as two built-in D-Tap outputs capable of taking a 80W load for powering common on-board accessories. USB-C PD (Power Delivery) port for two way power and charging when used with the new UC-PD1 compact charger. Cube style for use with cinema cameras. An antiviral and antimicrobial body for hygienic peace of mind.
KEY FEATURES
| Capacity: | 145Wh (14.5V/ 9.9Ah) |
| Max Output Voltage: | 16.8V DC |
| Nominal Voltage: | 14.54V DC |
| Max Discharge Current: | 15.2A‡ |
| D-Tap: |
80W each |
| USB-C PD: |
Input/Output Max. 60W (5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A) |
| End Voltage: | 11V |
| Battery Protection: | Over charge, Over discharge, Over current |
| Ambient Temperature: | To charge: 32°F ~ 104°F (50°F ~ 86°F recommended) To discharge: -4°F ~ 113°F (50°F ~ 104°F recommended) To store: 32°F ~ 104°F (three months) |
| Dimensions: | 3.46(W) x 4.96(H) x 3.29(D) inches |
| Weight: | 2.05 lbs approx. |
| ‡ may vary depending on the operating temperature |
97Wh High-Load Li-Ion
3-Stud Mount Battery w 2x D-Tap & USB-C
by Idx
Ref # ZEN-C98G
For full specifications of this model of products please visit the IDX site clicking HERE
PRODUCT DETAILS
The ZEN-C98G 3-Stud Mount battery line, the ZENITH Series. The ZEN-C98G provides a robust 97Wh capacity with the ability to handle max draw at 12.7A/140W loads, as well as two built-in D-Tap outputs capable of taking a 80W load for powering common on-board accessories.
USB-C PD(Power Delivery) port for two way power and charging when used with the new UC-PD1 compact charger. Cube style for use with cinema cameras. An antiviral and antimicrobial body for hygienic peace of mind.
KEY FEATURES
| Capacity: | 97Wh (14.5V/ 6.6Ah) |
| Max Output Voltage: | 16.8V DC |
| Nominal Voltage: | 14.54V DC |
| Max Discharge Current: | 12.7A‡ |
| D-Tap: |
80W each |
| USB-C PD: |
Input/Output Max. 60W (5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A) |
| End Voltage: | 11V |
| Battery Protection: | Over charge, Over discharge, Over current |
| Ambient Temperature: | To charge: 32°F ~ 104°F (50°F ~ 86°F recommended) To discharge: -4°F ~ 113°F (50°F ~ 104°F recommended) To store: 32°F ~ 104°F (three months) |
| Dimensions: | 3.46(W) x 4.96(H) x 2.70(D) inches |
| Weight: | 1.54 lbs approx. |
| ‡ may vary depending on the operating temperature |
- ««
- « Previous
- 1
- 2
- 3
- 4
- Next »
- »»
Showing: 31 to 35 of 35