For full specifications of this product please visit the Clear-Com site clicking HERE

PRODUCT DETAILS

The FreeSpeak Edge base station is a standalone 1RU device that provides extensive connectivity to a wide range of Clear-Com endpoints along with third-party Dante devices.

Built primarily to deploy digital audio connections and IP transceivers, the base station also provides support to FreeSpeak II and Edge beltpacks, 1.9 GHz E1 and IP transceivers*, and 2.4 GHz E1 transceivers.

Please refer to the Clear-Com AoIP Network Recommendations guide for additional switch settings and network characteristics.

*Note: A 1.9 GHz beltpack cannot roam between and E1 1.9 GHz transceiver and an IP 1.9 GHz transceiver. Beltpacks on each system can communicate through the base station.

KEY FEATURES

Capacity

• Supports up to 6 IPT or FSE transceivers and up to 10 E1 transceivers (1.9 or 2.4GHz)
• Supports up to 100 channels

Base Station

• Standard 1 rack unit (RU) device
• High quality 12kHz audio to FS Edge beltpacks
• 2 large full-color touch screen TFT displays
• 4 rotary encoders for gain and menu operation
• Headset connection
• Stage Announce and Prog. Audio cable included
• Functions as PTP Leader Clock

Connectivity

• Wireless 5GHz Edge transceivers and beltpacks
• Wireless 1.9GHz and 2.4GHz FSII splitters, transceivers and beltpacks
• Dante enabled audio devices
• AES67 devices via Dante controller
• 4-wire ports (8 ports RJ45)
• 2-wire ports (4 XLR-3F)
• GPIO (D-type 9 pin)
• LAN – 2 x RJ45, 2 x SFP

Configuration

• CCM browser-based configuration tool
• Direct management with encoders and display

Related Videos (you will be redirect to a site external of ProAVSys domain)

Introduction to the FreeSpeak Edge Base Station

FreeSpeake Edge: It's Here and It Changes Everything

For full specifications of this product please visit the Clear-Com site clicking HERE

PRODUCT DETAILS

The FSE-TCVR-50-IP is an active IP transceiver antenna for the FreeSpeak Edge wireless system. The transceiver delivers duplex communications from the Eclipse® HX matrix system via the E -IPA-HX interface card to the FreeSpeak Edge beltpacks. Each transceiver can support up to ten FSE-BP50 beltpacks. When supported with an E-IPA-HX card with 64 licensed ports, up to 64 FreeSpeak Edge beltpacks and 64 transceivers can be deployed with one Eclipse HX matrix system.

The FreeSpeak Edge Digital Wireless RF Configuration Guide provides specifications, best practices and guidance for using the 5 GHz band and RF channels.

KEY FEATURES

Transceiver

• LED status indicators on top and bottom of transceiver
• External omnidirectional antennas for the transceiver
• Dual redundant radios per beltpack and transceiver
• Separate radios for RF and radar scanning
• Wall-mount plate
• Microphone stand mounts (metric and imperial threads)
• Tripod spigot mount

Connectivity

• Functions with FreeSpeak Edge base, Arcadia Central Station, and E-IPA-HX cards
• Supports 10 FreeSpeak Edge beltpacks per transceiver
• Supports up to 64 transceivers on an Eclipse HX matrix system with 64 port E-IPA-HX card
• Robust radio link works in high multipath or reflective environments
• Wi-Fi coexistence
• Standalone mode for site survey and demo
• AES256 shared key encryption
• Dual network connections
• etherCON RJ45 network connection
• High speed SFP fiber cage
• Power-over-Ethernet (PoE) up to 330ft (100m)
• Daisy-chaining up to three locally powered transceivers

Mechanical

• IP53 rating for wet and dusty conditions

For full specifications of this product please visit the Clear-Com site clicking HERhttps://www.clearcom.com/product/fsii-base-ii-5/E

PRODUCT DETAILS 

The FSII-BASE-II is a base station for the wireless FreeSpeak II 1.9 GHz and 2.4 GHz active transceiver antennas and beltpacks. The FSII-BASE-II has four 2-wire connections for analog partyline connection, four 4-wire audio connections and four displays with soft keys. Dedicated stage announce (SA) output and program audio input are provided.

KEY FEATURES

For full specifications of this product please visit the Clear-Com site clicking HERE

PRODUCT DETAILS

The FSII-BP19 is a rugged, water-resistant beltpack that operates in the ISM license-free 1.9 GHz frequency range. Featuring the “Clear-Com Sound”, the FSII-BP19 has high audio bandwidth for superior intelligibility and listening comfort

KEY FEATURES

• Functions with FSII base, FreeSpeak Edge base, Arcadia Central Station, E-IPA-HX card, and FSII splitter hardware
• Typical indoor range: 300 ft (90 m), outdoor range: 800 ft (240 m)
• 1.9 and 2.4 GHz beltpacks operate on a single system
• Up to 65 – 90 beltpacks on a single system
• Encoder Volume Swap between A&C and B&D
• “Listen Again” message replay
• Simple 2-channel partyline operation to 5-channel intercom on the same beltpack
• Over-the-air beltpack registration
• 18+ hour battery life or USB port for continuous operation
• XLR-4M headset connector
• IP53 rating for wet and dusty conditions
• Built-in flashlight

For full specifications of this product please visit the Clear-Com site clicking HERE

PRODUCT DETAILS

The FSII-BP24 is a rugged, water-resistant beltpack that operates in the ISM license-free 2.4 GHz frequency range. Featuring the “Clear-Com Sound”, the FSII-BP24 has high audio bandwidth for superior intelligibility and listening comfort.

KEY FEATURES

• Functions with FSII base, FreeSpeak Edge base, Arcadia Central Station, E-IPA-HX card, and FSII splitter hardware
• Typical indoor range: 300 ft (90m), outdoor range: 800 ft (240m)
• 1.9 and 2.4 GHz beltpacks operate on a single system
• Up to 65 – 90 beltpacks on a single system
• “Listen Again” message replay
• Simple 2-channel partyline operation to 5-channel intercom on the same beltpack
• Over-the-air beltpack registration
• 18+ hour battery life or USB port for continuous operation
• XLR-4M headset connector
• IP53 rating for wet and dusty conditions
• Built-in flashlight

For full specifications of this product please visit the Clear-Com site clicking HERE

PRODUCT DETAILS

The FSII O2 2.4 GHz beltpack is specifically designed to work in Hyperbaric chambers safely, operating at atmospheric pressures of 5.1 atm, 517 kPa, or 75 psi with a change of +/- 26 psi per minute without damage.

KEY FEATURES

• Functions with FSII base, FreeSpeak Edge base, Arcadia Central Station, E-IPA-HX card, and FSII splitter hardware
• Designed to work at atmospheric pressure up to 75 psi
• Typical indoor range: 300 ft (90m), outdoor range: 800 ft (240 m)
• 1.9 and 2.4 GHz beltpacks operate on a single system
• Up to 65 – 90 beltpacks on a single system
• “Listen Again” message replay
• Simple 2-channel partyline operation to 5-channel intercom on the same beltpack
• Over-the-air beltpack registration
• XLR-4M headset connector
• IP53 rating for wet and dusty conditions
• Built-in flashlight
• Uses AA alkaline or rechargeable Nickel Metal Hydride batteries

For full specifications of this product please visit the Clear-Com site clicking HERE

PRODUCT DETAILS

The FSII-TCVR-19 is an active transceiver antenna for the FSII-BP19 beltpacks. The antenna can be locally powered or powered via the FSII base station or matrix on shorter connections (less than 1000 ft). The FSII-TCVR-19 has a mount for wall or microphone stand. A green status light is visible from either mounting orientations. When mixed with FSII-TCVR-24 antennas, a single radio space can support up to 65-90 FreeSpeak II 1.9 GHz or 2.4 GHz beltpacks

KEY FEATURES

For full specifications of this product please visit the Clear-Com site clicking HERE

PRODUCT DETAILS

The FSII-TCVR-24 is an active transceiver antenna for the FSII-BP24 beltpacks. The antenna can be locally powered or powered via the FSII base station or matrix on shorter connections (less than 1000 ft). The FSII-TCVR-24 has a mount for wall or microphone stand. A blue status light is visible from either mounting orientations. When mixed with FSII-TCVR-19 antennas, a single radio space can support up to 65-90 FreeSpeak II 1.9 GHz or 2.4 GHz beltpacks.

KEY FEATURES

• Functions with FSII base, FreeSpeak Edge base, Arcadia Central Station, E-IPA-HX card, and FSII splitter hardware
• Uses existing FSII base, E-QUE-HX cards, and FSII splitter hardware
• Supports 4 FSII-BP24 beltpacks per FSII-TCVR-24 transceiver
• Supports systems with up to 65-90 beltpacks when mixed with FSII-19-TCVRs
• Blue LED status indicator on top and bottom
• Mic stand or wall mount orientation (metric and imperial threads)
• IP53 rating for wet and dusty conditions

For full specifications of this product please visit the Clear-Com site clicking HERE

PRODUCT DETAILS  

The FSII-TVCR-IP-19 is an active transceiver antenna for the FSII-BP19 beltpacks. The transceiver connects to the Eclipse® HX matrix system via the E-IPA interface card. Each transceiver can support up to 10 FSII-BP19 beltpacks. When supported with the E-IPA card, up to 50 1.9 GHz beltpacks (in North America or 64 beltpacks in EU countries) and up to 64 transceivers can be supported on one Eclipse HX matrix system.

KEY FEATURES

• Functions with FreeSpeak Edge base, Arcadia Central Station, and E-IPA-HX card
• Requires E-IPA-HX card and an Eclipse HX frame (not available for FSII-BASE-II)
• For use with FreeSpeak II 1.9 GHz only
• Operates over IP on an AES67 compatible network
• Supports 10 FSII 1.9GHz beltpacks per transceiver
• Up to 64 transceivers supported on Eclipse HX matrix system
• Ethercon RJ45 network connections (2)
• High speed fiber SFP cages (2)
• Power-over-Ethernet (PoE) up to 300 ft (91 m)
• Green LED status indicator on top and bottom
• Mic stand or wall mount orientation (metric and imperial threads)
• IP53 rating for wet and dry conditions

For full specifications of this product please visit the Clear-Com site clicking HERE

PRODUCT DETAILS

The HelixNet® Digital Network Partyline Intercom System delivers intuitive and familiar workflows of Clear-Com’s analog partyline in a networked intercom system.

Built on 50+ years of Clear-Com’s heritage and experience with the elegantly simple analog partyline systems, HelixNet is a next generation partyline intercom system for users requiring fast setups, effortless management, scalability, deployment quality and adaptability to traditional and modern cabling infrastructure without interference from channel crosstalk, noise or buzzes.

Powered by Clear-Com’s advanced I.V.Core® technology, developed to provide efficient and easy-to-use partyline mixing on Ethernet networks. Invisible to the user, I.V.Core continuously analyzes voice activity, talk and listen levels through the system routing relevant audio packages to user stations and interfaces for optimal bandwidth utilization and listening experience.

Mixing and processing power is dynamically added to the system with each user station and interface in real-time, allowing the system to expand without the need of additional cards, routing or configuration – just like analog partyline.

KEY FEATURES

Familiar Partyline Channels

Built around familiar and innovative partyline channels, where all channel users can hear all talkers, HelixNet provides an easy transition for intercom users, allowing them to focus on their primary task with minimal assistance or training. Users can select or be assigned any of the system’s 12 or 24 channels with independently mixed Program Audio without change in system configuration, wiring, crosstalk or noises. Ease of deploying channels on HelixNet allows for efficient communication.

Effortless Administration

HelixNet user stations are automatically discovered, firmware matched and added to the system without configuration. Designed for fast operation, easy of use and flexible deployment, HelixNet allows configuration locally using intuitive front panel menus on the user stations, or centrally from the system’s Core Configuration Manager (CCM), an intuitive administration interface accessible on web browsers.

Infrastructure Agnostic

Concurrently capable of supporting user station connections over traditional XLR audio cabling and Ethernet networks allows for the most suitable connectivity for the application at hand.

Robust Powerlines allow user station network and power connections from a main station using rugged diagnostics. Ethernet and fiber provide the ability to utilize structured cabling as well as standard or converged networks, automatically adaptive to a wide range of network quality. Flexible power options over Powerline, Power-over-Ethernet (PoE) and local AC or DC power. HelixNet is unique in its infrastructural flexibility.

Flexible Interfacing

A wide variety of interfaces can be modularly added to HelixNet main stations to create the most common interfacing requirements, such as 2-wire and 4-wire line level. Seamless integration with LQ Series IP interfaces further expands interfacing density and enables the ability to add Station-IC or Agent-IC Virtual Intercom Clients for Windows, MacOS, Android and iOS, VoIP SIP telephone interfacing, two-way radio interfacing, GPIO and IP connections to E-IPA and/or IPA32 card-equipped Eclipse HX matrix systems.

Products in the Family

Main Stations - HMS-4X

Remote Stations - HRM-4X

Speaker Stations - HKB-2X     S-MOUNT

Beltpacks - HXII-BP

Interfaces - HLI-2W2     HLI-4W2     HLI-ET2     HLI-FBS

LQ Integration - LQ-2W2     LQ-4W2     LQ-4WG2    LQ-R2W4     LQ-R2W4-4W4     LQ-R4W8     LQ-R4WG8

Software - CCM

Accessories - BP-MOUNT

Simple HelixNet System

HMS-4X main station is the master of any HelixNet system connecting to user stations via Ethernet networks or via XLR Powerlines. Powerlines allow connectivity using standard 3-pin XLR cables, daisy-chained or split passively with all channels. User stations are powered via Powerlines, Power-over-Ethernet (PoE) or local power. HLI modules provide 2-wire partyline and 4-wire ports.

Featured HelixNet Products:

• HMS-4X
• HRM-4X
• HKB-2X with S-MOUNT
• HXII-BP
• HLI-2W2
• HLI-4W2
• CCM for HelixNet

Other Featured Products:

• MS-704
• FSII-BASE-II
• CC-300